1.Name：3D Printing Pen
2.Discharging Mode:Hot Melt Extrusion Molding
4.Temperature :PLA–（190-210℃） / ABS –（220-230℃）
9.Print Temperature :160℃-230℃
1. Let the children paint and create toys at will
2. Stimulate children’s imagination and improve their practical ability
A: Standard version–3D pen + 1PC * 3M PLA
B: Upgraded version-3D pen + 1PC * 3M + 12PCS * 5M PLA (63M / 206Ft)
C: Advanced version — 3D pen + 1PC * 3M + 24PCS * 5M PLA (123M /403.5Ft)
Please Note/Please Note
1.Please do not touch the nozzle or heat dissipation area during use.
2.The device will switch to standby mode if not being used over 2 minutes,and press the loading filament button to wake it up.
3.You need cut the filament ending to smooth before loading.
4.Unloading the filament after each use is highly recommended.
5.After drawing,melting filament in nozzle by pressing loading button to prevent nozzle block.
6.This equipment is suitable for children above 8 years old and adults. Childen should use under the supervision of adults ! DO NOT touch the nib during using!
How To Use
1)Power the 3D printing pen. Yellow LED light indicates standby mode
2) The LED screen will display “PLA” or “ABS”, choose the right material mode
3)Keep pressing the Load Filament Button, Red LED light on means the pen is in preheating mode.
4)When the Red indicator turns green, the pen is ready to work.
5)Insert the filament into the ‘Filament import hole’, press and hold the ‘Load Filament Button.
6)Keep clicking the Load Filament Button until the material flows out from the nozzle.
Product detailed list
4.1* 3M PLA Filament